FANUC M710iC/50 6 AXIS ROBOT ON STAND WAS USED AS PICK AND PLACE ROBOT R30iB FLEX PALLETIZER

1-USED FANUC M710IC/50 6 AXIS ROBOT FLEX PALLETIZER 50KG X 2,050 MM H-REACH WITH R30IB CONTROLLER

APPEARS NEW NEVER USED OR SLIGHTLY USED

SERIAL NUMBER E-74542

DATE OF MFG. 01/2015

STK 104713

====================================================

SPECIFICATIONS WHILE OBTAINED FROM SOURCES DEEMED RELIABLE ARE SUBJECT TO CHANGE WITHOUT NOTICE AND TO VERIFICATION BY BUYER:

The FANUC M-710iC/50 is one of FANUC's intelligent robots. Performing dispensing, material-handling and packaging applications are no problem for this industrial robot arm. What distinguishes the M-710iC 50 is that the robot is coated with a protective epoxy. Its wrist, which is often subjected to the worst condition, can withstand high-pressure washing. Each joint has extra oil seals and every bolt is coated. The 710 iC 50 can be immersed in 15cm to 1m of liquid and is certifiably protected from all dust, cutting down on wear and tear. Even the robot\'s base is safeguarded, designed to expel air, thus preventing outside air from seeping into the robotic arm.

Robot Specifications:

Axes: 6

Payload: 50kg

H-Reach: 2050mm

Repeatability: ±0.07mm

Robot Mass: 560kg

Structure: Articulated

Mounting: Floor, Inverted, Angle

Robot Motion Speed:

J1 175 °/s (3.05 rad/s)

J2 175 °/s (3.05 rad/s)

J3 175 °/s (3.05 rad/s)

J4 250 °/s (4.36 rad/s)

J5 250 °/s (4.36 rad/s)

J6 355 °/s (6.2 rad/s)

Robot Motion Range:

J1 ±360°

J2 ±225°

J3 ±440°

J4 ±720°

J5 ±250°

J6 ±720°

EQUIPPED WITH:

FANUC R30IB CONTROLLER

FANUC ROBOT CONNECTION CABLES RM1 AND RP1

FANUC COLOR TEACH PENDANT

ARM1 CONNECTION

ARP1 CONNECTION

END OF ARM SECTION SUCTION CUP FIXTURE

VACUM GENERATOR

FOB TRUCK, 205 GRAHAM ROAD, IMLAY CITY, MI 48444

THIS ITEM IS OFFERED FOR SALE SUBJECT TO PRIOR SALE AND BUYER'S UNCONDITIONAL ACCEPTANCE OF SELLERS TERMS AND CONDITIONS. RAB INDUSTRIES, INC.